BU35 3" BOSS CLAMP D: 112

GLD#
DIXON-114229
MFG#
BU35

Connectez-vous pour afficher les disponibilités et les prix

Qté min. de commande 1

Description

Dixon Pince à 4 boulons, gamme : Boss, 3-32/64 à 3-60/64 po nominal, 6-1/2 po de longueur, 5 po de largeur, 150 pi-lb, bande de fer, plaqué zinc, domestique

Spécifications

Plus d'infos
UNSPSC	31162906
Domestic/Import	Domestic
Finish	Zinc Plated
Series	Boss™
Width	5 in
Band Material	Iron
Length	6-1/2 in
Nominal Size	3-32/64 to 3-60/64 in Hose
Torque Rating	150 ft-lb

Caractéristiques

4-bolt type clamp with 2 gripping fingers and 2 clamp sections
Bolts in Boss™ clamps are designed to bend as they are tightened, this allows the clamp to conform to the hose outside diameter
Always tighten bolts to their specified torque value
Periodic re-tightening of bolts is required due to "cold flow" phenomenon present in all rubber hoses
Boss™ clamps are for single use only, once removed they are to be discarded
Recommended for steam service up to 450 deg F
The bolts used in the boss interlocking clamps are not standard bolts
They vary from standard bolts in their length, diameter, overall thread length and material hardness
These bolts can be retorqued, but it is not recommended that the bolts or clamps be reused, as they are designed for a single bend only
Torque values for clamps are based on dry bolts, the use of lubricant on bolts will adversely effect clamp performance

Guides & Manuels

Dixon_DATL016W_Catalog.pdf

AVANTAGES POUR PROFESSIONNELS

Connecte-toi ou crée un compte pour professionnels, afin d’obtenir avantages et prix exclusifs!