Marque
Dixon®
2 S Boss Clamp D: 112
- GLD# DIXON-114227
- MFG# BU29
Qté min. de commande 1
Description
Dixon Pince à 4 boulons, gamme : Boss, 2-32/64 à 2-50/64 po nominal, 4-13/32 po de longueur, 3-7/8 po de largeur, 60 pi-lb, bande de fer, zingué, domestique
Spécifications
| Domestic/Import | Domestic |
|---|---|
| Finish | Zinc Plated |
| Series | Boss™ |
| Width | 3-7/8 in |
| Band Material | Iron |
| Length | 4-13/32 in |
| Nominal Size | 2-32/64 to 2-50/64 in Hose |
| Torque Rating | 60 ft-lb |
Caractéristiques
- 4-bolt type clamp with 2 gripping fingers and 2 clamp sections
- Bolts in Boss™ clamps are designed to bend as they are tightened, this allows the clamp to conform to the hose outside diameter
- Always tighten bolts to their specified torque value
- Periodic re-tightening of bolts is required due to "cold flow" phenomenon present in all rubber hoses
- Boss™ clamps are for single use only, once removed they are to be discarded
- Recommended for steam service up to 450 deg F
- The bolts used in the boss interlocking clamps are not standard bolts
- They vary from standard bolts in their length, diameter, overall thread length and material hardness
- These bolts can be retorqued, but it is not recommended that the bolts or clamps be reused, as they are designed for a single bend only
- Torque values for clamps are based on dry bolts, the use of lubricant on bolts will adversely effect clamp performance
Guides & Manuels
Dixon_187_Catalog.pdf
TéléchargerAVANTAGES POUR PROFESSIONNELS
Connecte-toi ou crée un compte pour professionnels, afin d’obtenir avantages et prix exclusifs!
