CLAMP 2-BOLT 3/4IN 1-10/64 TO 1-20/64IN

GLD#
9892440
MFG#
BU9

Temps de livraison estimé

24 à 48h

Connectez-vous pour afficher les disponibilités et les prix

Qté min. de commande 1

Description

Dixon® 2-Bolt Clamp, Series: Boss™, 3/4 in Inside Dia, 1-10/64 to 1-20/64 in Outside Dia, 2-31/32 in Length, 2-9/16 in Width, 9/16 in Hex Bolt, 21 ft lb, Iron Band, Zinc Plated

Spécifications

Plus d'infos
UNSPSC	31162906
Finish	Zinc Plated
Inside Diameter	3/4 in
Series	Boss™
Width	2-9/16 in
Band Material	Iron
Length	2-31/32 in
Torque Rating	21 ft-lb
Outside Diameter	1-10/64 to 1-20/64 in
Bolt Size	9/16 in Hex

Caractéristiques

Recommended for steam service up to 450 deg F
Replacement nuts and bolts are available
Two gripping fingers and two clamps sections
The bolts used in the boss interlocking clamps are not standard bolts
They vary from standard bolts in their lengths, diameter, overall thread lengths and materials hardness
These bolts can be retorqued, but it is not recommended to reuse the bolts or clamps, as they are designed for a single bend only
Torque values for clamps are based on dry bolts
The use of lubricant on bolts will adversely effect clamps performance
Do not lubricate nuts and bolts
Bolts in boss clamps are designed to bend as they are tightened and this allows the clamps to conform to the hose outside diameter