DIAL INDICATOR DIAMETER GAGE, 12-18", .0005" GRADS 1101-18LR

The sensitive contact transfers dimensions to the dial indicator through a linear friction-free mechanism

The dial has a double row of graduations reading in opposite directions - minus in red and plus in black

There are two gage feet at the reference end and one foot at the sensitive end of the gage to set the gage on the work and align the contacts

Gage depth is set by adjusting the gage feet up or down

A lever-actuated reverse mechanism loads the gage for either inside or outside diameter measurements

The gage contacts are easily changed to I.D. or O.D. gaging by turning them end for end

Unless otherwise specified, the dial indicator sent with the gage reads in 0.0005 in increments with a total range of +/-.030 in