Marque
Cleveland®
1/4 556 3/8S 4F TiN
- GLD# GREEN-117619
- MFG# C32581
Qté min. de commande 1
Description
Cleveland® End Mill, Center Cutting General Purpose Single End Square End, Series: HGC-4C, 1/4 in Diameter Cutter, 2-7/16 in Overall Length, 5/8 in Length of Cut, 4 Flutes, Spiral Flute, 3/8 in Shank Diameter, Right Hand Cutting Direction, 30 deg Helix Angle, Straight/Weld-On Flat Shank, Cobalt 8/M42 HSS, TiN Coated
Spécifications
| UNSPSC | 27112803 |
|---|---|
| Application | General Finishing Applications |
| Cutter Diameter | 1/4 in |
| Cutting Direction | Right Hand |
| Finish | TiN Coated |
| Flute Type | Spiral |
| Helix Angle | 30 deg |
| Length of Cut | 5/8 in |
| Material | Cobalt 8/M42 HSS |
| Number of Flutes | 4 |
| Overall Length | 2-7/16 in |
| Series | HGC-4C |
| Shank Diameter | 3/8 in |
| Shank Type | Straight/Weldon Flat |
| Type | Center Cutting General Purpose Single End Square End |
Caractéristiques
- High red hardness for high heat conditions
- Multi-flute end mills deliver a smoother finish and are better for peripheral cuts
- Multi-flute end mills have a heavy duty cross section for better rigidity
- Increased number of flutes mean more cutting edges, providing more cutting action
- Coatings reduce heat and abrasion to increase tool life
- The increased lubricity of the coating surface reduces material adhesion and built-up edge, enabling even higher feed rates
- Coatings reduce the amount of torque required for machining to allow more efficient use of equipment
- TiN (titanium nitride) coating in gold color intended for aggressive machining
- TiN coating increase machining speed 25 to 30% versus bright speeds
- Applicable on titanium alloys, nickel alloys, cobalt alloys and stainless stee
AVANTAGES POUR PROFESSIONNELS
Connecte-toi ou crée un compte pour professionnels, afin d’obtenir avantages et prix exclusifs!
Produits connexes
