Marque
Cleveland®
FRAISE 5/16 X 3/8 2 FL COBALT TIN ENDMILL
- GLD# 4289954147390272000
- MFG# C32509
- UPC 697334325093
Qté min. de commande 1
Description
Cleveland® End Mill, Center Cutting General Purpose Single End Square End, Series: HGC-2, 5/16 in Diameter Cutter, 2-1/2 in Overall Length, 9/16 in Length of Cut, 2 Flutes, Spiral Flute, 3/8 in Shank Diameter, Right Hand Cutting Direction, 30 deg Helix Angle, Straight/Weld-On Flat Shank, Cobalt 8/M42 HSS, TiN Coated
Spécifications
| UNSPSC | 27112803 |
|---|---|
| Application | General Finishing Applications |
| Cutter Diameter | 5/16 in |
| Cutting Direction | Right Hand |
| Finish | TiN Coated |
| Flute Type | Spiral |
| Helix Angle | 30 deg |
| Length of Cut | 9/16 in |
| Material | Cobalt 8/M42 HSS |
| Number of Flutes | 2 |
| Overall Length | 2-1/2 in |
| Series | HGC-2 |
| Shank Diameter | 3/8 in |
| Shank Type | Straight/Weldon Flat |
| Type | Center Cutting General Purpose Single End Square End |
Caractéristiques
- High red hardness for high heat conditions
- 2-Flute end mills have greater chip ejection capacity and are ideal for slotting
- Coatings reduce heat and abrasion to increase tool life
- The increased lubricity of the coating surface reduces material adhesion and built-up edge, enabling even higher feed rates
- Coatings reduce the amount of torque required for machining to allow more efficient use of equipment
- TiN (titanium nitride) coating in gold color intended for aggressive machining
- TiN coating increase machining speed 25 to 30% versus bright speeds
- Applicable on titanium alloys, nickel alloys, cobalt alloys and stainless stee
AVANTAGES POUR PROFESSIONNELS
Connecte-toi ou crée un compte pour professionnels, afin d’obtenir avantages et prix exclusifs!
Produits connexes
