Marque
Kennametal®
PASTILLE KSEM1350HPGM KCPM45
- GLD# KEN-138313
- MFG# 5626645
Qté min. de commande 1
Description
Kennametal® Modular Drill Tip, Replaceable, ANSI Code: KSEM1350HPGM KCPM45, 13.5 mm Dia, C Insert Seat, 140 deg Included Angle, 2 Number of Cutting Edges, Manufacturer_s Grade: KCPM45, No Through Coolant (Yes/No), Carbide, PVD-TiAlN Coated, Applicable Materials: Steel and Stainless Steel
Spécifications
| UNSPSC | 23241600 |
|---|---|
| ANSI Code | KSEM1350HPGM KCPM45 |
| Finish | PVD-TiAlN Coated |
| Manufacturer's Grade | KCPM45 |
| Material | Carbide |
| Series | KSEM™ |
| Type | Replaceable |
| Included Angle | 140 deg |
| Insert Seat Size | C |
| Diameter | 13.5 mm |
| Through Coolant (Yes/No) | Oui |
| Number of Cutting Edges | 2 |
| Manufacturers Grade | KCPM45 |
| Applicable Materials | Stainless Steel, Steel |
Caractéristiques
- KSEM KCPM45 HPG cutting edges provide increased productivity and improved tool life in steel in difficult conditions
- HPG geometry works with low cutting and feed forces and provides very good centering
- Reinforced cutting edges and good chip forming improve tool life due to high wear and edge chipping-resistance
- KCPM45 combines a very tough, fine grain carbide substrate with an advanced multi-layer TiAlN coating
- It is capable of machining steel even in the most demanding conditions
- Material snap back, stacked plates, cross holes and inclined exits are some examples of where KCPM45 HPG edges will do a great job in your operations
- Use KCPM45 HPG cutting edges as an effective alternative in stainless steel as well
AVANTAGES POUR PROFESSIONNELS
Connecte-toi ou crée un compte pour professionnels, afin d’obtenir avantages et prix exclusifs!
Produits connexes
